Measuring Equipment

Product description: Main stem: Ø12x176mm Assistant stem: Ø10x160mm Clamp hole 8mm (optional: hole 3/8" with or without sleeve) For dial indicators with lug back or plain back Base: 60x50x55mm with on/off switch Packed in carton box

Resolution: 0.001mm/0.00005" Double sides display, LCD in two directions Buttons: power on/off, data set, metric-inch conversion, absolute and incremental measurement, LCD direction change RS232 output, IP54 protection, CR2032 battery, with one spare...

Product description:Graduation: metric 0.01mmDIN863, painted frame, ratchet stop, spindle lock, with zero adjusting wrench, carbide tipsMicrometers over 0-25mm/0-1" are supplied with standard rodsPacked in plastic box or wooden box

Product description:Used as level and protractorButtons: data hold, zero set, power on/off, adsolute and relative measurement4 work surfacesThe display flips over when the level is upside downCalibrated on any surfaceCR2032 battery, stainless steel...

Product description:With fine adjustmentMain stem: Ø12x176mmAssistant stem: Ø10x160mmClamp hole 8mm (optional: hole 3/8" with or without sleeve)For dial indicators with lug back or plain backBase: 60x50x55mm with on/off switchPacked in carton box

Product description:Resolution: 0.01mm/0.0005"Buttons: zero, inch/mm conversion, power on/offBattery SR44, with one spare battery, SPC data outputDIN862, hardened stainless steel construction, with locking clamp, for outside, inside, depth and step...

Dial test indicator holder

Product descriptionOptional graduations: 0.02mm, 0.02mm/0.001", 0.05mm, 0.05mm/0.001"With thumb knobDIN862, monoblock, made of hardened stainless steel, satin chrome plated reading surfaceWith locking clamp, for outside, inside, depth and step...

Product description:Draper Tools 71391 Non Contact Metal & Voltage Detector.   For detecting metal and voltage (5-1000V AC) in walls, continuity, microwave leakage.Has LED/audible warnings and adjustable sensitivity. Powered by 2 x LR44...

Product description:Draper - 30 BLADE 4 - 42 TPI UNF & UNC Screwpitch Gauge Set 45440Folding leaves, individually stamped with accurately formed thread profiles. American National Thread UNC-UNF, in the range 4-42TPI.

Product description:Available with tolerance measurementSatin-chrome plated brass bodyRuby contact point, diameter 2mmProbe length 27mmWith two holding stem: metric 4mm and 8mm; imperial 5/32” and 3/8”With spare batteryPacked in plastic box